Solid Freeform Fabrication of Metal Prototype Using Direct Metal Shaping Process

Jae Do Kim; Jin Yong Park; Myeong Woo Cho

Articles

Page Path

Article

직접식 금속 적층공정을 이용한 금속 시제품 제작

김재도, 박진용, 조명우

Solid Freeform Fabrication of Metal Prototype Using Direct Metal Shaping Process

Jae Do Kim, Jin Yong Park, Myeong Woo Cho

JKSPE 2000;17(10):56-62.

Published online: October 1, 2000

Author Affiliations

7 Views
0 Download
0 Crossref
0 Scopus

prev next

Full Article

Download PDF

Citations

Citations to this article as recorded by

Cite

CITE

export

Copy Download

Format

Download Citation

Download a citation file in RIS format that can be imported by all major citation management software, including EndNote, ProCite, RefWorks, and Reference Manager.

Format:

RIS — For EndNote, ProCite, RefWorks, and most other reference management software
BibTeX — For JabRef, BibDesk, and other BibTeX-specific software

Include:

Citation for the content below
Citation and abstract for the content below

Solid Freeform Fabrication of Metal Prototype Using Direct Metal Shaping Process

J. Korean Soc. Precis. Eng.. 2000;17(10):56-62. Published online October 1, 2000

Download Citation

Download a citation file in RIS format that can be imported by all major citation management software, including EndNote, ProCite, RefWorks, and Reference Manager.

Format:

RIS — For EndNote, ProCite, RefWorks, and most other reference management software
bib — For JabRef, BibDesk, and other BibTeX-specific software

Include:

Citation for the content below
Citation and abstract for the content below

Solid Freeform Fabrication of Metal Prototype Using Direct Metal Shaping Process

J. Korean Soc. Precis. Eng.. 2000;17(10):56-62. Published online October 1, 2000

Articles

Page Path

직접식 금속 적층공정을 이용한 금속 시제품 제작

Solid Freeform Fabrication of Metal Prototype Using Direct Metal Shaping Process

Full Article

Citations

CITE

Download Citation

Format:

Include:

ABOUT

BROWSE ARTICLES

EDITORIAL POLICIES

FOR CONTRIBUTORS